RANGKAIAN WIRELESS TERMOMETER DIGITAL
Wireless Digital Thermometer
This
simple circuit is designed to report the temperature via any standard
FM broadcast band radio at regular intervals. It uses a simple low bit
rate tone signalling scheme which can be interpreted easily by both humans and machines. Such a device can be used stand-alone or as part of a PC-based weather station or HVAC system.
My prototype was constructed with an ATMEL AT90S1200 fitted to a Dontronics SimmStick model DT-104. To save design time, I modified a low cost "wireless microphone" kit to act as the transmitter.
Commercial wireless thermometers are usually sold with only one receiver/display unit, and thus are limited to monitoring at only one location. My design allows any inexpensive FM radio to be used to monitor the temperature. Any number of monitoring locations can easily be set up.
Also, by plugging the output of the FM radio into the sound card on a PC and running a program which I am developing, temperature data can be logged for later display/analysis.
My prototype was constructed with an ATMEL AT90S1200 fitted to a Dontronics SimmStick model DT-104. To save design time, I modified a low cost "wireless microphone" kit to act as the transmitter.
Commercial wireless thermometers are usually sold with only one receiver/display unit, and thus are limited to monitoring at only one location. My design allows any inexpensive FM radio to be used to monitor the temperature. Any number of monitoring locations can easily be set up.
Also, by plugging the output of the FM radio into the sound card on a PC and running a program which I am developing, temperature data can be logged for later display/analysis.
